What are the installation methods of the lamps?
Release date: 2016-11-16 Source: Light billion network share: 
There are many types of household lamps, and the installation methods used in each type of lamp are different. In order to ensure the safety of the lamps, we must follow certain installation principles during the installation process. What are the installation methods of common lamps?
Ceiling light installation
The ceiling lamp is divided into two types: embossed and embedded. Generally, small ceiling lamps are installed on the joists, and large ceiling lamps are attached to the ceiling through pre-embedded iron members in the structural layer or iron members fixed by expansion bolts.
1. Opening on the ceiling: When designing the ceiling grille, the position of the ceiling light should be considered. At the ceiling lamp, the grille is made into a hole frame by the outer circumference of the lamp, and the frame can be used as a mounting connection structure of the lamp or a closing structure of the roof surface layer. When installing a large ceiling light, the hole frame of the opening should be reinforced.
2. Hanging ribs and luminaire connection: For large ceiling lamps to be installed on the surface layer of the ceiling, it is necessary to install slings from the structural layer. The hanging ribs can bury the hanging ribs during the construction of the slab, and the position of the reinforced ribs is accurate, but it is difficult to ensure the accurate installation position of the luminaires during construction. In this regard, the grille can be additionally hung in the installation position of the lamp, so that the grille is connected with the hanging ribs, and the lower is connected with the support frame on the luminaire. This is both safe and accurate.
3. Assembled ceiling lamps: The so-called "assembled ceiling lamps" are large ceiling lamps that are assembled into various patterns by using ordinary fluorescent lamps, incandescent lamps, etc., with additional grid glass, plexiglass or plastic crystal sheets. First make a connector on the ceiling or add an open frame on the ceiling, and then fix all kinds of hangers, hangers and ceiling connectors or connect with the reinforcement grille, then install lamps, glass or plastic sheets. In addition to the careful design of the installation of such lamps, the location of the lamps and the flatness of the decorative glass must be grasped during construction.
Chandelier installation
Large chandeliers are often mounted under the slabs of the structural floor or under the beams by means of booms or slings, and small chandeliers are often mounted on the joists.
1. First embed iron or wood bricks in the structural layer, the wooden bricks must have a strong force guarantee. The buried position should be accurate and there is sufficient room for adjustment.
2. Provide transition joints on iron and wood bricks to adjust the error of the embedded parts, and can be connected with the embedded nails and welding.
3. The boom and sling are connected to the transition piece.
Light strip and lighting ceiling installation
The light-emitting belt is the same as the light-emitting ceiling and the assembled ceiling light, and is assembled by using a combined fluorescent tube or an incandescent lamp and an architectural decorative member. The difference is that the expression form is different, and the former has a large layout area. Especially in open ceilings, decorative luminaires are often used to match the individual components or directly to the individual components of the decorative luminaire.
Lighting arrangement
Luminous belt: The luminaire is generally slidably mounted on the steel sling to form a long-shaped illuminating belt, and the panel is generally made of frosted glass or colored glass.
Lighting ceiling: Generally, combined lighting is used, and there are four common installation arrangements:
(1) High hanging arrangement: The luminaire is arranged on the upper part of the ceiling to maintain a certain distance from the surface of the ceiling. This practice creates diffuse light due to the occlusion of the monolithic components of the ceiling, making the illumination uniform and soft.
(2) Inlay layout: The luminaire is embedded in the single component, and the luminaire maintains the same level as the ceiling. The effect of illumination is not only related to the form of the luminaire, but also to the form of the individual components;
(3) Ceiling layout: A set of lamps consisting of fluorescent lamps, fixed under the ceiling. This arrangement has both determinant and interlaced. Since the luminaire is below the ceiling surface, the luminaire can be selected without being limited by the size of the individual components.
(4) Hanging arrangement: it can be a hanging chain type direct hanging type lamp or a diagonal type hanging lamp. There are many choices and combinations of light sources.
Lamps are the most expensive household items. Their installation must be rigorous and careful. In order to protect the health of family members, professional installation personnel must be installed.
Label: What are the installation methods of the luminaire?
Our surface mount box could include the CAT5E CAT6 CAT6A RJ45 Connectors
The surface mount box is an ideal for wall box and wire installation, we design many junction box, back mount box, blank mount box, loaded surface mount box.
Mateiral: ABS, PBT UL94V-0
1~8 ports and colors supply for your choice, they are an ideal for low voltage application for your security, data, networking solutions and telecom projects.
blank surface mount box, junction box, surface mount box, loaded surface mount box in China supplier
NINGBO UONICORE ELECTRONICS CO., LTD , https://www.uonicore.com