National Day went back and my friends brought me a car with a mobile phone holder abroad (why not send iphone7). I searched for the next US emperor with the National Bank to be around 200, so I dismantled the experience of the two hundred mobile phone stands.
Under the search, it is actually a company that specializes in mobile phone brackets. It is also very rare. As long as a domestic accessory company sells basic products, it begins to make various peripherals. The last domestic link
Parts are quite a lot
A piece of fixing glue, the basic principle probably knows, is regarded as non-mirror installation of this sucker pressing necessary accessories.
The base link, before quite curious why is called "Easy One Touch", looked at the main structure probably knows, this bracket is very special fixed mode, the main one-handed touch can be fixed.
There is a rubber compartment on the shelf to prevent the phone from being scratched. Tried down the fixed structure, it is quite flexible.
The base is fixed and there is an extension arm adjustment frame, originally thought that there is no extension arm.
The angle adjustment method of the extension arm is still a relatively traditional knob pressure fixed, but in my experience of tossing a lot of mobile phone brackets, this method is the most reliable (do not buy the car phone bracket that kind of easy adjustment The angle will then be rocked)
Suction cup, there is still a protective sticker
Instructions
The first is that the mobile phone clip part is linked with the base extension arm, and the structure is somewhat similar to the camera's ball head. The rotation can strengthen the grip force, and the spherical structure makes the phone stand also better adjust the angle you want.
The normal glossy/mirror surface can be fixed with a standard suction cup. The installation method is also simple.
The entire bracket is installed
I took a 5.5 inch mobile phone and tried it
The place of the middle LOGO is actually an institution. When the mobile phone is put down, it will trigger both sides of the folder to automatically clamp the mobile phone. It is no longer necessary to manually adjust and it is relatively simple.
When the test directly took a 5.5 inch mobile phone test, visual 6-inch models may also be OK, also tried the next 4 inch 5C can also be used, compatibility is relatively OK.
Actual installation
The front also stated that the original sucker of the base was suitable for mirror fixing, so there were lines or radian surfaces.
The attachment has a fixed rubber pad for this purpose. After selecting the fixed position, clean the dust on the lower surface, and then paste the fixed pad.
The position of the sucker is then placed on the pad
Press the pressure fixing button and then it's all right. . . It's that simple
Then the height or distance of the bracket is controlled by adjusting the extension arm. After the selection, the pressure valve of the extension arm is fixed so that the entire bracket will not be shaken.
Of course, the pressure of the ball head on the back of the mobile phone clip should also be fixed, so that the entire phone holder is installed.
One-handedly tried to fix it first, then shake it and watch it fixed.
The shelves are also well adjusted, rotated, or angled, which is a bit like the stand of a DELL U-Series monitor.
Is it reliable? Very solid, I tried to rub it with my hand and it was almost impossible to get up. The car trim board would be sucked up. If it was to be demolished later, we had to start with the rubber shuffling of the base and slowly remove it to remove it.
And when the vehicle is used, the entire mobile phone will not shake and will not affect the eye view.
Still on the GIF gesture
Finally summarize the advantages and disadvantages according to the example
Let's talk about the shortcomings
1, price? After all, more than two hundred
2, less style
Advantages
The installation is simple, the fixing method is also simple and reliable, and it will not shake, and the recycled plastic of the Shanzhai section is also more reliable.