Because the LED display industry does not use the environment, its installation method is also different. In general, the installation methods of indoor LED display screens are generally: mosaic installation, wall-mounted installation, wall-mounted installation, etc .; outdoor LED display screens are more commonly used in column-type installation and roof-type installation. The following editor makes a detailed description of the installation method of LED display manufacturers:
However, due to the particularity of its products, LED display screens often reflect the quality of the product and determine the effect of the display screen in use. Therefore, the installation and debugging of LED display screens is a very important technical activity. Here, the editor has compiled and compiled six common installation methods in the LED display industry:
What are the common installation methods of LED display? List of common installation methods
1. Mosaic installation: indoor, suitable for indoor screen with small area. Due to the small installation space, in order not to take up space, according to the size of the screen body, dig an area of ​​the same size on the wall, and embed the LED display in the wall. The wall is required to be a solid wall. The cost of pre-maintenance is higher. For outdoor installation, the mounting structure is suitable for the display project that has been included in the planning and design of the building. The construction space for the display screen is reserved in advance during the construction of the civil works project. It is embedded in the wall of the building, leaving enough maintenance space on the back.
2. Wall-mounted installation: mostly suitable for indoor LED display installation, with a small area (less than 10 square meters), the wall requirements are solid walls, hollow bricks or simple partition walls are not suitable for this installation method.
3. Hanging installation: mostly suitable for large places such as station LED electronic display, airport LED electronic display, etc. to play the role of indicating signs. The screen area is required to be small. (Below 10 square meters) It is required to have a suitable installation site, such as a beam or lintel above, and the screen body should be added with a back cover under normal circumstances.
Ordinary mounting is suitable for single-box display screens with a total weight of less than 50kg. It can be directly hung on the load-bearing wall without the need to reserve maintenance space. The display box adopts a front maintenance design, and the display screen is lifted from the bottom during maintenance That's it.
The rack mount is suitable for general outdoor display screens. Considering the difficulty of display screen maintenance, steel structure is used for support between the screen body and the wall. 800mm maintenance space is reserved. The space is equipped with maintenance facilities such as horse tracks and climbing ladders. And install auxiliary equipment such as power distribution cabinet, air conditioner, axial fan, lighting,
4. Column type installation: It is mostly used for the installation of outdoor advertising LED electronic display screens. It has a wide field of vision and relatively empty surroundings, such as squares and parking lots. According to the size of the screen body, it can be divided into single-post and double-post installation. The column installation is suitable for the installation of LED display screens on open ground, and the outdoor screen is installed on the upright column. In addition to the steel structure of the screen body, the column type also needs to be made of concrete or steel columns, mainly considering the geological conditions of the foundation.
5. Rooftop installation: It is mainly suitable for outdoor advertising LED electronic display. The installation site is mainly the roof of the building. As the height of the building increases, the level of wind protection to be considered must also increase.
6. The seat mounting structure is to use a concrete structure on the ground to build a wall that is sufficient to support the entire LED display, build a steel structure on the wall to install the display, the steel structure reserves 800mm of maintenance space, and place related equipment and maintenance facilities .
Precautions for installing outdoor LED display
The outdoor LED display has a large area, and the design of its steel structure should consider many factors such as foundation, wind load, earthquake level, waterproof, dustproof, ambient temperature, and lightning protection. Auxiliary equipment such as power distribution cabinets, air conditioners, axial fans, and lighting should be placed in the steel structure, as well as maintenance facilities such as horse tracks and ladders. The whole outdoor screen structure should meet the protection grade below IP65.
[Hands-free]Automatic operated through motion captured sensor, touch-free to avoid cross infection
[No-leakage and durable]No-dripping valve and waterproof design, energy-economic 4 batteries stand for 1 year
[Adjustable dispensing]4 level of dispensing from 0.5 ML to 2ML matching multiple purposes for hands-washing, bathing, cleaning
[Suitable for almost all liquids]Large capacity with 15.2 fl oz/450 ml refill tank, suitable for lotions, shampoos, liquid soaps, sanitizers, medicinal alcohol etc
[Easy to setup]Wall-mounted or put on flat place
Widely used in bathrooms, kitchens, kindergartens, offices, schools, hospitals, airports, hotels and restaurants.
Touchless Hand Sanitizer Dispenser
Alcohol Dispenser, Hands-Free Automatic Soap Dispenser, Auto Sanitizing Dispenser,touch free liquid soap dispenser,automatic soap hands free dispenser
Axiswell Technology Co., Ltd , https://www.medhealthycare.com