Concerned about Zhang Aunt is also almost three hundred days, during which several handcuffed. But today is the first time drying, it is tightly dirty
I am a senior dog, but my autumn trick has ended in half. I got an offer from a Zhuhai technology company last week. I feel that my family and I are still satisfied, but I will go to find a better company. Therefore, this time is more free to visit Zhang Aunt, and then there is this first sun
The mechanical keyboard is still cautious for pitting. When I double 11 years ago, 159 yuan to start a Pennefather V500 green shaft, after the hand that ambiguous feeling, really is unforgettable eternal life two days before 339 (449-30-80) to start today's pig's foot Ikbc c104. I am still in a fever state. I do not know when I will be able to return. Attach a photo of my first keyboard.
Pennefather v500
Boring on the winter when the Internet is boring to buy a led to add the backlight, the Pennefae V500 axis reserved a lamp, but unfortunately there is no pcb, so when the lamp needs to separate the steel and pcb, and then led the series Paralleling. This pressure drop, led will be relatively dark, and add v500 key cap light, so the effect is very bad. For the pcb did not reserve the lamp position of the mechanical keyboard, plus lights, split the steel plate and pcb really is egg ache fortunately I am an engineering man, hands-on ability will not be worse.
It seems to be far away. Today's pig's foot is ikbc c104 black and blue. Let's start the box.
Ikbc c104 packaging front
Ikbc c104 back package
Out of the box
Changed ikbc with red keycap
Because my dormitory environment is chaotic and I worry about polluting the eyes of all of you, I took a direct shot and couldn't see other places. Therefore, the photos are also vague. Everyone will be honest about it. I feel that the packaging of ikbc c104 is not available. Pennefather v500 is good, but ikbc is simple and elegant.
Sent 10 key caps (5 blue 5 red) and a key puller, sent the key cap feel oil should not be pbt. At the beginning, I was a little unaccustomed to the original cherry shaft. It may have been the Kayba axis I used to use the Pennefather v500. The keycap is a good feel for matte, but it is still a bit unaccustomed. However, it feels good after a day's adjustment. To sum up the feeling, Pirelli V500's Kaihua axis feels loose, the sound is relatively large and crisp (perhaps because of the reasons for a long time? Valued friends give me under the science?) Ikbc c104 cherry axis is tight The sound is relatively calm.
After testing for a period of time, I found that there was no big problem and I started to install the light. All kinds of dismemberment, first on the map.
Remove the keycap and place it for easy loading
Undo keycap ikbc
Blue shaft close-up
To the side, people with obsessive-compulsive disorder should look cool
The details of the work is very good, not like many people on the Internet say that glitches and the like
When I installed the lights, I discovered that I forgot to take the details.
Icc pcb, work is not bad
Master chip
Power line and data line total interface
This red keycap is very showy, but unfortunately does not touch the drop
number key
The overall effect seems to be no worse than the light transmittance of the keycap
note:
1, pcb reserved on the lamp with solder, generally not enough, it is best to add a little tin on the basis of the factory solder, and then use the head heating iron, the led from the shaft to pass through, perfect !
2, open the keyboard is best to use two phone cards to solve, first with a slot into the gap, and then insert the second overlap, and then around the keyboard brush a circle, it is easy to open, too late to take pictures will not map.
3, plus lights need to pay attention to safety, be careful iron hot! I was burned several times in the university several years ago. I had fingerprints on my fingers and my fingerprints changed. I had ten fingers and changed lines. Afterwards, I was able to find my uncle.
Two phone cards
There is also I hesitated for a long time between f108 and c104, and finally chose the c104. The main reason is that the c104 keycap is pbt, although the keycap can not transmit light, and the light control effect is not so cool. After all, there is always something to be abandoned.
Weibo: No reviews yet, come and grab the sofa!
Lynx Box M13
Installation Guide>>
Huawei Glory Box Pro
Installation Guide>>
Millet box 3
Installation Guide>>
Infinik i9
Installation Guide>>
KKTV
Installation Guide>>
Letv TV S50 Air
Installation Guide>>
Desktop tidy mood will be better! Desktop practical beauty tips + niche software recommended original innovators Sennheiser Sennheiser MX375 & MX170 headphones out of the box feel this really is a NAS? Phicomm Fetion Daily N1 Family NAS Unboxing Review Tesla announced to temporarily shut down the Model 3 production line Sony DPT-CP1 e-book release, only A5 paper size 
Canon EOS M6 camera start experience from entry to give up: Synology Synology DS416play NAS network storage usage report (on) A bumpy upgrade path - NETGEAR R6400 hand brushing Merlin firmware experience Blackgroup Hui DSM6.1 installation brief tutorial ( Attached Download) Synology DSM6.1 Application Detailed Part Two: Synology DSM 6.1 Data Security Three Master → Synchronize, Backup, Snapshot, +Recruits USB Copy 2.0
Pro, you need to login to comment!