Electric shaver selection and maintenance

The generation of electric shavers has saved a lot of time for male friends and has greatly facilitated life. After the shaver is used, it also needs to be maintained in time. As the saying goes, "Working with the tools must be done first." Regular maintenance of the shaver not only extends its useful life, but also relates to the health of men.

When selecting an electric shaver, it is necessary to observe whether the sound during the no-load operation is small and uniform, and it is not possible to make noises with light and heavy fluctuations. When used, there should be no obvious vibration and the action is light. Sharp edges, no pain on the skin, safe cutting, no pulling hair stimulation, short hair remaining after shave, no obvious feeling by hand. The outer cutter head slides smoothly on the skin. After use, it should be easy to clean, hair, dander, etc. is not easy to enter the shaver. Should be equipped with a housing to store protective blades, or provided with a structure that allows the blade to retract. In the choice of head rotation type, if you have a thin beard, smooth skin, and require a shorter shave, you can choose to vibrate reciprocating or general rotation; for a sexy bearded friend with a look, you can Select a rectangular slit, circular slit or three-head rotary electric shaver.

To maintain the performance of the battery, it should be used in an ambient temperature range of 0 to 40 degrees Celsius. If you do not use it for a long time, take out the dry battery to avoid damage to the machine parts due to leakage.

The rechargeable razor should be placed in the off position when charging, and the plug should be pulled out after charging. The battery of the rechargeable shaver will self-discharge if it is left for a long time, and should be used after it has been charged for more than three months. Do not charge continuously for more than two days. This will shorten the battery life.

Regularly apply a small amount of knife lubricant to the inner surface of the outer cutter head. Some internal knife support shaft or motor shaft and other rotating parts also need to add lubricating oil. When smearing, apply a small drop of oil on the finger, apply the shaft, or dribble with a cotton swab. Note that the amount of oil should not be too much. Switch off after use. In order to protect the blade, a protective cover must be put in the box and stored in a dry place. Do not wipe clean with alcohol or other volatile chemical liquids.

Electric shavers should be cleaned after two or three uses. Many electric shavers are washable. You can open the net directly to the outlet flush, the water temperature is not hot to the appropriate; if it can not be washed razor, in the cleaning, first with a small brush to clean the knife residue on the knife and skin crumbs, and then use The cotton ball gently wipes off the oil stain on the blade. Do not use some harder material to scrape it. Otherwise it will damage the blade.

Regularly drop half of the balsam on the tip of the knife, taking care not to drop the balm on the rotating shaft, and then put the razor head in place. This clears the locusts that grow on the cutter head. The special smell of wind spirits and the active ingredients therein are the nemesis of the aphid, and its oily state does not allow the blade to rust.

Don't wait until the beard has stayed long enough to remember to shave. If the beard is too long, it is best to use an electric razor with a trimmer, or use a scissors to shorten the beard first, and then use an electric razor to achieve better results. Do not apply pressure when using it to avoid deformation.