Microchip MOST150 INIC enables smart antenna modules to be coaxially connected to automotive control, audio, video and IP networks

Microchip Technology Inc. , the world's leading provider of integrated solutions for integrated microcontrollers, mixed-signal, analog devices and flash memory , announced that MOST® CooperaTIon has released the latest MOST150 technology coaxial physical layer specification. After the release of the new industry standard specification, Microchip can implement the Smart Antenna Module and the Automotive MOST150 Advanced Driver Assistance System (ADAS) and infotainment network via the OS81118AF Intelligent Network Interface Controller (INIC) with integrated coaxial transceiver. connection. There is a growing need in the market for smart antenna telematics systems and other data traffic from AM/FM, DAB, SDARS, DVB-T, 3G/LTE, GPS and Wi-Fi® signals to be connected to the vehicle network for high bandwidth Control, audio, video and Internet Protocol (IP)-based communications, and the MOST150 coaxial physical layer is an ideal choice. In addition, the use of mature, low-cost coaxial cables to provide both communication signals and power to these in-vehicle systems simplifies design and installation, reduces cost and vehicle weight, and facilitates compliance with various environmental regulations.

Microchip OS81118AF cPhy INIC

With the OS81118AF, designers can connect to smart antenna modules via coaxial cable to create in-vehicle mobile and Wi-Fi® connectivity applications based on the MOST150 network. This solution is simple and convenient, and caters to the needs of today's automotive market for wireless connectivity applications such as Internet access, email, social networking and location/GPS based services. The MOST150 technology was successfully deployed in the first model in 2012, and the first models using the MOST150 technology coaxial physical layer technology are scheduled to be launched in 2017. Since 2001, more than 180 models have been equipped with more than 150 million MOST devices. This smart antenna module coaxial deployment solution is extremely cost-effective and has a wide range of market applications, and is expected to further promote the popularity of MOST technology in the automotive market.

OS81118

Dan Termer, vice president of automotive information systems at Microchip, said: "We are pleased that MOST CooperaTIon has released the new MOST150 technology coaxial specification. It is the joint efforts of our customers, the MOST CooperaTIon working group and Microchip, which contributed to this specification. We would like to express our heartfelt thanks to the MOST150 technology coaxial physical layer, we are now able to provide a superior technical solution with a robust physical layer and stable electromagnetic characteristics to achieve a smart antenna module in a cost-effective manner. Deployment."

Supply

The Microchip OS81118AF cPhy INIC is sampling now and is available in a 72-pin QFN package.

Introduction to Microchip Technology Inc.

Microchip Technology Inc. (Nasdaq: MCHP) is the world's leading provider of patented integrated microcontrollers, mixed-signal, analog devices and flash memory, providing low-risk products to thousands of consumer products worldwide. Development, lower total system cost and faster time to market. Headquartered in Chandler, Arizona, USA, Microchip offers outstanding technical support, reliable products and superior quality.

  PCB Spring Terminal Blocks provides 2.54mm, 3.50mm, 5.00mm, 7.50mm, 7.62mm equal spacing; single core wire can be directly inserted without the aid of handle, but smaller wire can be clamped by opening the clamp with handle; no key specification, so the height can be greatly reduced, as long as a screwdriver is pressed down, the wire can be easily taken out; most spring terminals are one piece The wiring mode is very suitable for the use of communication system, lighting system, monitoring system and building wiring; various wiring directions are favorable for assembly in a narrow space, and the number of arbitrary combination contacts and convenient operation are available, which is suitable for high-density wiring requirements.  

  PCB Spring Terminal Block, connection mode can be classified into cage clamp and dish clamp contact. It can be used instead of printed circuit universal Screw Terminal Block, more flexible. The product is designed in accordance with IEC60998 and UL1059.

PCB Spring Terminal Blocks

Spring Terminal Block,Spring Terminal Connector,PCB Spring Terminal Block,Spring Clamp Terminal Block

Suzhou WeBest Electronics Technology Co.Ltd , https://www.webestet.com